Epson Stylus DX4850 Service Manual

EPSON Stylus CX4100/CX4200/CX4700/CX4800/DX4200/DX4800/DX4850 Revision A
MAINTENANCE Overview 192
Figure 6-10. Lubrication on Front Frame
Figure 6-11. Lubrication on Link Lever (Left)
Figure 6-12. Lubrication on Link Lever (Right)
Figure 6-13. Lubrication on PF Roller Unit (1)
<Lubrication Point>
From the left edge (left line mark)
to the right edge (right line mark)
of the Front Frame
<Lubrication Type>
KEN Grease
<Lubrication Amount>
200mg
<Remarks>
Use a injector to apply.
<Lubrication Point>
1. Edge line of the Link Lever
(Left)
2. Around two guide pins of the
Link Lever Holder (Left)
<Lubrication Type>
1. G-26
2. G-26
<Lubrication Amount>
1. φ1 x 1mm
2. φ1 x 2 points
<Remarks>
Use a injector to apply.
Left Line Mark
Right Line Mark
1
2
2
Link Lever (Left)
Link Lever Holder (Left)
<Lubrication Point>
1. Edge line of the Link Lever
(Right)
2. Around two guide pins of the
Main Frame (Right)
<Lubrication Type>
1. G-26
2. G-26
<Lubrication Amount>
1. φ1 x 1mm
2. φ1 x 2 points
<Remarks>
Use a injector to apply.
<Lubrication Point>
Contact point between the PF
Grounding Spring and the PF
Roller Unit
<Lubrication Type>
G-26
<Lubrication Amount>
φ1 x φ of the PF Roller Unit
(0.05Gr)
<Remarks>
Use a injector to apply.
1
2
2
Link Lever (Right)
Main Frame (Right)
PF Grounding Spring
PF Roller Unit

Epson Stylus DX4850 Specifications

General

Brand	Epson
Model	Stylus DX4850
Category	Printer
Language	English