Basic Operations
Loading Cut Sheets
The method for loading cut sheets varies with the
thickness of the paper. Three methods are available. In
addition, the size of paper used varies with the loading
method.
Auto sheet feeder Paper thickness: 0.08 mm–
0.3 mm
Paper size: Varies with
paper type. See U
“Supported Media” on page
107.
Front manual feed (fine art
media)
Paper thickness: 0.3 mm–
0.7 mm
Paper size: A4, A3, A3+,
Letter
Front manual feed (poster
board)
Paper thickness: 0.7 mm–
1.3 mm
Paper size: A3+
Note:
If the paper is wavy or curled, flatten the paper before
loading it in the printer, or use new paper. If wavy or
curled paper is loaded, this printer may not be able to
recognize the paper size, feed the paper, or print correctly.
We recommend that you return the paper to its original
package and store it flat, and take it out of the package
just before you use it.
Loading Paper into the Auto
Sheet Feeder
A
Turn on the printer.
B
Open and fully extend the paper support.
C
Open the front cover.
Epson Stylus Photo R3000 User's Guide
Basic Operations
21
To Next Page
Loading...
Need help?
General
Weight and Dimensions
