*About Power Management using Power Off Timer
You can adjust the time before Power Management is applied.
Any increase will affect the printer’s energy efficiency.
Please consider the environment before making any change.
Network Settings
Item Parameter Explanation
Wireless LAN Setup Setup Wizard Adjust settings for connection to a wireless LAN.
When using a wireless LAN, enable a security option such as WEP
or WPA. Unsecured networks are subject to monitoring by
unknown individuals and other security risks that can result in data
being revealed to third parties.
Select Disable Wireless LAN to use a wired LAN.
See the following for more information on configuring the printer
for connection to a network.
U Network Guide (PDF)
Push Button Setup (WPS)
PIN Code Setup (WPS)
Disable Wireless LAN
General Network Setup - Choose a printer name and adjust TCP/IP settings for connection
to a network.
U Network Guide (PDF)
Check Network
Connection
- Check the printer’s connection to the network.
The results can be printed for more complete information. See the
following for information on how to interpret the printed results.
U Network Guide (PDF)
Confirm Network Settings Printer Name, Connection,
Signal Strength, Obtain IP
Address…
View network settings and connection status.
A status sheet can be printed for more complete information.
Restore Default Settings
Item Parameter Explanation
Reset Network Settings - Return network settings to their factory settings.
Reset All except Network
Settings
- Return all control panel settings except network settings to their
factory settings.
Reset All Settings - Return all settings to their factory settings.
Epson Stylus Photo R3000 User's Guide
Using the Control Panel
89
To Next Page
Loading...
Need help?
General
Weight and Dimensions
