Depending on the media type, the print quality may
decline or borderless printing cannot be selected.
U “Epson Special Media Table” on page 108
Setting Procedures for Printing
Making Settings in Windows
A
When the printer driver's Main screen is
displayed, you can configure various settings
required for printing such as Media Type,
Source, Size.
U “Basic Printing Methods (Windows)” on
page 30
B
Select Borderless, and then click Expansion.
You can not choose the expansion amount when
Roll Paper or Roll Paper (Banner) is selected for
Source.
C
Select Auto Expand or Retain Size as the
Method of Enlargement. If you select Auto
Expand, set how much of the image goes beyond
the edge of the paper as shown below.
Max Sizes larger than A4:
Approximately 3 mm past the top,
4.5 mm past the bottom, and 3.5 mm
past the left and right edges
A4 or smaller (excluding 100 × 148
mm, 9 × 13 cm/3.5 × 5 in., 10 × 15
cm/4 × 6 in.):
Approximately 3 mm past the top, 4
mm past the bottom, and 2.5 mm
past the left and right edges
100 × 148 mm, 9 × 13 cm/3.5 × 5 in.,
10 × 15 cm/4 × 6 in.:
Approximately 1.3 mm past the top,
2.5 mm past the bottom, and 2.5 mm
past the left and right edges
Mid ½ of Max
Min ¼ of Max
Epson Stylus Photo R3000 User's Guide
Printing Varieties
59
To Next Page
Loading...
Need help?
General
Weight and Dimensions
