D
Check other settings, and then start printing.
Turning Off the Power
Using Power Off Timer
This printer comes equipped with the following two
types of power saving settings. You can save power by
transitioning into sleep mode or use the Power Off
Timer function to automatically turn off the power
when the printer has not been used for a certain period
of time.
❏ Sleep mode
When the printer enters sleep mode, the control
panel's screen turns off and the internal motors and
other parts switch off to consume less power.
Sleep mode ends and normal operation is restored
when a print job is received or any button
(excluding the P button) is pressed in the control
panel. The printer will enter sleep mode if no
operations are performed for 13 minutes.
Tip:
❏ The printer enters sleep mode when there are
no errors, no print jobs being received, and no
control panel or other operations performed.
❏ When the printer enters sleep mode, the
control panel’s screen goes blank as if the
power has been turned off, but the P light
remains lit.
❏ Power Off Timer
The printer includes a Power Off Timer function
that allows the printer to be turned off
automatically if there are no errors, no print jobs
being received, and no control panel or other
operations being performed for more than the
specified amount of time. In the Power Off Timer
setting, you can choose the elapsed time before the
printer is automatically turned off from 4 Hours
and 8 Hours.
At the factory setting, the Power Off Timer setting
is set to 4 Hours.
Power Off Timer settings can be selected in the
Setup menu. U “The Setup Menu” on page
87
Epson Stylus Photo R3000 User's Guide
Basic Operations
35
To Next Page
Loading...
Need help?
General
Weight and Dimensions
