The following describes how to join four printed pages
together.
A
Cut the upper left sheet along the alignment
mark (vertical blue line).
B
Lay the upper left sheet on top of upper right
sheet. Lineup the X marks as shown in the
illustration below, and temporarily fasten them
using an adhesive tape on the back.
C
While two pages are overlapping, cut them along
the alignment mark (vertical red line).
D
Join the left and right sheets together.
Use an adhesive tape to stick the backs of the
sheets together.
E
Repeat steps 1 to 4 for the lower sheets.
F
Cut the bottom of the upper sheets along the
alignment marks (horizontal blue line).
G
Lay the upper sheet on top of the lower sheet.
Lineup the X marks as shown in the illustration
below, and temporarily fasten them using an
adhesive tape on the back.
Epson Stylus Photo R3000 User's Guide
Printing Varieties
70
To Next Page
Loading...
Need help?
General
Weight and Dimensions
