Note:
Epson recommends the use of genuine Epson ink
cartridges. Epson cannot guarantee the quality or
reliability of non-genuine ink. The use of non-genuine
ink may cause damage that is not covered by Epson’s
warranties, and under certain circumstances may cause
erratic printer behavior.
Information about non-genuine ink levels may not be
displayed, and use of non-genuine ink is recorded for
possible use in service support.
A
Make sure the printer is on.
B
Open the printer cover.
C
Open the cartridge cover.
D
Remove the ink cartridge that will be replaced.
Hold the cartridge by the hooks and lift it straight
up.
If the cartridge does not come out easily, pull
harder.
Note:
Removed ink cartridges may have ink around the
ink supply port, so be careful not to get any ink on
the surrounding area when removing the
cartridges.
E
Holding the new cartridge as shown, shake it four
or five times and then remove it from the package
and peel off the yellow film.
You may hear a rattling sound from inside the
cartridge when it is shaken.
Note:
Do not touch the green IC chip on the ink cartridges.
You may not be able to print properly.
Epson Stylus Photo R3000 User's Guide
Maintenance
93
To Next Page
Loading...
Need help?
General
Weight and Dimensions
