Epson STYLUS PRO 9400 - Page 17

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Basic Specifications 17
1.2.4.3 Selectable Paper Size
The following paper sizes can be selected in the driver for Roll paper/cut sheet. *
1
Note : The sizes in bold type are for the Stylus Pro 9400/9800.
Note "*1": Basically, load cut sheet on the printer in portrait orientation. And the paper grain
direction should run vertically for best result.
"*2": When using media other than paper loading it in landscape orientation, the allowable
media thickness is 3.15 to 59 mil (0.08 to 1.5 mm).
"*3": The printer does not support this sized media. Note that the sizes given in the table
are printable area sizes, not media sizes.
Table 1-9. Selectable Paper Size
Paper Size Size (W x H) Paper Size Size (W x H)
Letter 8 1/2 x 11 in B4 257 x 364 mm
US B 11 x 17 in 11 x 17 in B3 364 x 514 mm
US B 17 x 24 in 17 x 24 in B2 515mm x 728mm
US C 17 x 22 in 17 x 22 in B1 728 mm x 1,030 mm
US D 22 x 34 in 22 x 34 in B1 (Landscape)
*
2
728 mm x 1,030 mm
US E 34 x 44 in 34 x 44 in B0 1,030 mm x 1,456 mm
A4 210 x 297 mm Super B0 1,118 mm x 1,580 mm
A3 297 x 420 mm 30 x 24 in 30 x 24 in
Super A3 / B 329 x 483 mm 3.5 x 4.5 in*
3
3.5 x 4.5 in
A2 420 x 59 4mm 8 x 10 in 8 x 10 in
A1 594 x 841 mm 11 x 14 in 11 x 14 in
Super A1 24 x 36 in 16 x 20 in 16 x 20 in
A0 841 mm x 1,189 mm 60 x 90 cm 60 x 90 cm
Super A0 914 mm x 1,292 mm 40 x 60 cm 40 x 60 cm
B5 182 x 257 mm 30 x 40 cm 30 x 40 cm