Epson STYLUS PRO 9400 - Page 41

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 41
Low
IK command error MISMATCH ERROR
MAKE SURE THAT THE INK
CARTRIDGE AND DRIVER
SETTINGS MATCH
Flashing ON Flashing Flashing X X X X X X {{
Wrong roll paper path PAPER SETTING ERROR
LOAD ROLL PAPER
ON ON --- ON { XXXXXX{
Wrong cut sheet path PAPER SETTING ERROR
LOAD CUT SHEET
ON ON --- ON { XXXXXX{
Cleaning*
8
CLEANING
PLEASE WAIT
FlashingOFF------XXXXXXX{
Executing ink sequence PLEASE WAIT Flashing OFF --- OFF X X X X X X X {
Executing ink sequence
(Confirming to run a
Timer Cleaning)
POWER CLEANING
YOU MUST MOVE INK
LEVERS WHEN CLEANING
NO EXECUTE? YES
Flashing OFF --- OFF { XXX{ XXX
Confirming to execute an
initial ink charge*
9
PRESS PAUSE BUTTON TO
START CHARGING INK.
PLEASE DO NOT LEAVE
OPERATION IS NEEDED
WHILE INK IS CHARGING
Flashing OFF --- --- X X X X X X { X
Initial charging CHARGING INK
NN%
FlashingOFF------XXXXXXX{
Cutting by cut switch CUTTING PAPER
PLEASE WAIT
FlashingOFF---OFFXXXXXXX{
Conversion cartridge
near end of service life
CONVERSION CRTG LIFE
CONVERSION CRTG NEAR
END OF SERVICE LIFE
Flashing ON ON OFF --- X X X X X { X
Conversion cartridge life
error
CONVERSION CRTG LIFE
REPLACE CONVERSION
CRTG WITH A NEW ONE.
Flashing ON ON OFF --- X X X X X X X
High
Ink out*
10
INK OUT
INSTALL NEW CARTRIDGE
ON ON ON OFF --- X X X { XX{
Continued to next page
Table 1-28. Panel Display (continued)
Priority
Printer Status Messages on the LCD
LED Status Panel Button Function
Power Pause Ink Paper
Paper
Select
Enter
Paper
ejection
(3 sec.)
Paper feed Menu
Cleaning
(3 sec.)
Pause
Reset
(3 sec.)