Epson STYLUS PRO 9400 - Page 49

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Product Description Control Panel 49

Job Information
The job information (68 bytes x 10 jobs) is stored on the NVRAM on the main
board and can be checked by JOB INFORMATION in the panel setting menu. The
information includes the following items.
Note "*1": Currently reserved as 00h 00h fixed.
"*2": As the printer is not equipped with a parallel I/F, 01h is reserved.
NOTE: The saving values for each item when printing internal adjustment
patterns are as shown below.
Table 1-35. Job Information
Parameter Information Remarks
xx1 The Quantity of
Saved Job
Information
0 to 10
xx2 Saving No. 0 to 9
xx3, xx4 ID No. 1 to 65535 (0 not used.)
xx5 Using I/F 01 to 05 (Parallel* / USB / OptionIF1 / OptionIF2*
/ IEEE1394) *
1
FF: not use
xx6 Job Status 01 to 05 (Pending / Printing / Complete / Cancel /
Abort)
xx7~xx8 Character String
Code
Currently reserved as 00h 00h fixed.
xx9~xx24 User name (16 byte) In case of less than maximum length, fill
<SP>(20h).
xx25~xx56 Document name
(32byte)
*2
xx57~xx72 Host name Saves 16-byte out of 32-byte sent from the driver
xx73 Media ID Media ID specified by the driver
xx74 Impression value 01-02, the value is 2 when DP=ON is specified in
the job.
xx75~xx90 Ink used [xxx.xx ml] Reply in the order of ink cartridge
alignment
xx91~xx94 Paper Used H:xxxx mm W:xxxx mm
xx95~xx100 Print Start Tim YYMMDDhhmmss, Time of JS
xx101~xx106 Time Used for Print YYMMDDhhmmss, Time of JE (Time of
Complete/Cancel/Abort)
xx107 Ink set information Same as IK
xx108 Paper path Same as PP
xx109~xx110 Page number ---
Table 1-36. Job Information for Adjustment Pattern Printings
Pattern Type Use I/F
Character
Code
User
Name
Document Name
Nozzle Check Pattern Print FFh 00h Printer Nozzle Check
Status Print FFh 00h Printer Status Sheet
Job Information Print FFh 00h Printer Job Information
User Paper Setting Print FFh 00h Printer Custom Paper
Bi-D Adjustment FFh 00h Printer Head Alignment
Uni-D Adjustment FFh 00h Printer Head Alignment
Paper Thickness Detection FFh 00h Printer Detect Paper Thickness
Cutter Position Adjustment FFh 00h Printer Cutter Position