What to do if my Epson STYLUS PRO 9400 Printer says 'BORDERLESS ERROR LOAD CORRECT SIZE PAPER'?
This error means that an A2 size cut sheet media or roll paper that does not support borderless printing has been installed for borderless printing. Install a different size of cut sheet media or roll paper.
Why does my Epson STYLUS PRO 9400 show 'SENSOR ERROR LOAD DIFFERENT PAPER'?
This error means the loaded paper does not match the selected paper type. Match the loaded paper with the paper type selected in the printer settings.
What does 'F/W INSTALL ERROR UPDATE FAILED RESTART THE PRINTER' mean on my Epson STYLUS PRO 9400?
This message indicates that the printer failed to update the FirmWare. Restart the printer, and then update the FirmWare again.
What does 'COMMAND ERROR CHECK DRIVER SETTINGS' mean on my Epson STYLUS PRO 9400?
This error can occur if damaged data is sent to the printer, or the installed printer driver is not correct for the printer. Stop printing, and then press the Pause button for 3 seconds. Finally, make sure that the installed printer driver is correct for the printer.
What to do if my Epson printer shows 'MISMATCH ERROR MAKE SURE THAT THE INK CARTRIDGE AND DRIVER SETTINGS MATCH'?
This error means the cartridge option of the printer driver has not been changed yet, or a non-Epson genuine ink cartridge is installed. Stop printing, and then press and hold the Pause button for 3 seconds. Finally, select the correct ink cartridge in the printer driver according to the actual ink cartridge set on the printer. If you want to continue printing, press the Pause button. If a non-Epson ink cartridge is installed, press the Pause button for 3 seconds to cancel printing or press the Pause button to continue printing.
What to do if my Epson printer displays 'PAPER SETTING ERROR LOAD ROLL PAPER'?
This message indicates that the roll paper is not set correctly. Load the roll paper correctly, and then select Roll Auto Cut On or Roll Auto Cut Off.
What does 'CONVERSION CRTG LIFE CONVERSION CRTG NEAR END OF SERVICE LIFE' mean on my Epson STYLUS PRO 9400?
This message means the conversion cartridge needs to be replaced soon. Replacement of conversion cartridge is nearly needed. Press the Pause button.
General| Country of origin | Japan |
|---|---|
| Sound pressure level (printing) | 50 dB |
| Color | Yes |
| Maximum resolution | 1440 x 720 DPI |
| Number of print cartridges | 4 |
| Maximum print size | A0 (841 x 1189 mm) |
| Compatible operating systems | Mac OS X, OS 9 Microsoft Windows 2000 / XP |
| Power consumption (standby) | 6 W |
| Power consumption (typical) | 50 W |
| USB connector | USB Type-A |
| USB 2.0 ports quantity | 1 |
| Pallet width | 1200 mm |
| Pallet height | 1000 mm |
| Quantity per pack | 1 pc(s) |
| Pallet length (UK) | 1890 mm |
| Quantity per pallet | 2 pc(s) |
| Package depth | 1880 mm |
| Package width | 820 mm |
| Package height | 870 mm |
| Package weight | 125000 g |
Weight and Dimensions| Dimensions (WxDxH) | 1702 x 678 x 1196 mm |
|---|
Signals a precaution that, if ignored, could result in serious or fatal personal injury.
Signals a precaution that, if ignored, could result in damage to equipment.
Describes the manual's structure, listing six chapters and an appendix.
Explains symbols used to provide additional information or warn of danger.
Provides a general overview and specifications of the product, including features.
Details technical specifications like print method, resolution, paper handling, and speed.
Illustrates the printer's exterior and identifies key parts and connectors.
Explains the printer's control panel, including buttons, display, and LEDs.
Lists the printer's main controller components: CPU, RAM, and interfaces.
Describes the available interface options: USB, IEEE1394, and optional interfaces.
Details available optional units and consumables like ink cartridges and maintenance tanks.
Introduces the chapter's content on print mechanism and operating principles.
Explains the major electrical parts of the printer's print mechanism.
Describes the operation of the C594 MAIN Board and its components.
Details the power supply circuit board and its control signals.
Explains the purpose and principle of colorimetric calibration for color accuracy.
Provides basic procedures for efficient printer troubleshooting.
Explains error messages displayed on the LCD panel and their remedies.
Addresses print quality issues like dot missing and bands, offering solutions.
Provides remedies for service call errors that require professional intervention.
Introduces disassembly procedures and general precautions.
Details the step-by-step procedures for disassembling printer components.
Introduces the adjustment program and procedures after repair or part replacement.
Covers mechanical adjustments like sensor calibration and belt tension.
Explains fundamental adjustments like RTC/ID settings and serial number input.
Details advanced adjustments like Auto Bi-D and destination settings.
Describes how to check print quality results like nozzle status and alignment.
Explains how to reset various counters related to component life.
Guides on how to update the printer's firmware.
Details the procedure for setting the printer model after Main Board replacement.
Provides information on how to maintain the printer for optimum operating condition.
Details periodic maintenance items and product life estimates for components.
Lists essential items to check during printer servicing.
Explains the lubrication points and procedures for printer maintenance.
Lists and describes the connectors on the main and sub boards.
Provides circuit diagrams for various printer boards.
Includes exploded diagrams of printer parts for assembly/disassembly reference.
To Next Page
