107
1. If the platen is not in the forward position, press the moveable base button to move it forward.
2. Remove the platen frame.
3. Load media onto the platen you are using:
• For L, M, or S size platens, use A4- or letter-size.
• For XS size platens, use one sheet in 7.1 inch × 7.9 inch (180 mm × 200 mm) size.
• For sleeve platens, use one sheet in 3.9 inch × 3.9 inch (100 mm × 100 mm) size.
Note: The type of media depends on the Printer Mode you are using. For White ink mode, use
transparent media, such as OHP film, or colored paper. For Color ink mode, use plain paper. If you
are using the medium grooved platen, use thick paper. If you do not have thick paper, use a different
platen.
4. Position the media on the platen:
• For L, M, S, and XS size platens, load media in the center.
To Next Page
Loading...
