68
4. Tighten the fixing lever and then secure the platen gap lever.
Parent topic: Preparing Your Printer
Loading a T-shirt
Refer to these sections to load a T-shirt into the printer.
If you notice any creases on the T-shirt, use a heat press to iron them out before loading the shirt.
Caution: Do not load polyester T-shirts on a platen that is covered with a grip pad; otherwise, the fabric
of the platen may be stained with ink while printing.
Loading a T-shirt on the Grip Pad
Loading a T-shirt on the Platen
Loading a Sleeve on the Sleeve Platen
Loading a Shirt on the Medium-Grooved Platen
Determining the Height of the Platen
Starting a Print Job
To Next Page
Loading...
