151
15. Attach the waste ink outlet caps that were removed during printer assembly. See the Start Here
sheet for more information.
Parent topic: Moving or Transporting the Printer
Related tasks
Setting Up the Printer After Transport
Setting Up the Printer After Transport
Follow these steps to set up the printer after moving it. See the Start Here sheet for detailed information.
1. Verify that the location is suitable for installation.
2. Install the rear cover.
3. Install the waste ink tube and the waste ink bottle.
4. Install the platen you want to use.
5. Connect the power cable to an electrical outlet and turn on the printer.
6. Perform a nozzle check and confirm that there are no clogged nozzles.
7. Align the print head and check the print quality.
To Next Page
Loading...
