Epson SureColor F2270 - Loading a Sleeve on the Sleeve Platen

78
9. Press down the frame of the platen so that it does not become loose.
Note: Using the platen frame to place the garment surface under a suitable amount of tension can
reduce swelling of the garment surface during printing.
10. Tuck the T-shirt around the platen so that it does not drape over the movable base.
Parent topic: Loading a T-shirt
Loading a Sleeve on the Sleeve Platen
Before printing, carefully load a sleeve onto the sleeve platen.
Note: Make sure that the correct platen is installed on the printer.
1. Turn on the printer, if necessary.
2. If the platen is not in the forward position, press the moveable base button to move the platen
forward.