96
• Printing was started by pressing the start button on the printer, but was canceled before printing
was complete
Parent topic: Loading a T-shirt
Cancelling a Print Job
You can cancel a print job or cancel data that is being received by the printer using the printer's control
panel.
Note: You cannot cancel printing from the Garment Creator 2 software once the computer has finished
sending data to the printer. See the Garment Creator 2 online help for more details.
1. Press the pause button on the printer or select Pause from the status display on the LCD
screen.
2. Select Cancel.
Printing stops immediately and data is deleted.
Note: You can stop a job by clicking Cancel on the screen that is displayed while the job is being
sent from Garment Creator 2. If a job being sent from the computer to the printer has finished
sending, cancel it at the printer.
Parent topic: Loading a T-shirt
Finishing a T-shirt
Follow the instructions in these sections to remove your T-shirt from the printer and fix the ink.
Removing a Printed T-shirt
Fixing the Ink
Parent topic: Basic Printing
Removing a Printed T-shirt
After you print an image on a T-shirt, remove it from the printer.
Caution: Do not touch the printed surface when you handle the T-shirt; the ink is still wet.
To Next Page
Loading...
