187
Material Fabric with a cotton blend ratio of 50 to 100% (100% cotton, thick
fabric with a high weave density recommended)
Fabric with a polyester blend of 50 to 100% (100% polyester
recommended)
Note: Apply pre-treatment solution when printing on polyester T-
shirts or when printing white ink on cotton T-shirts.
Parent topic: Technical Specifications
Interface Specifications
USB Interface Front: High-Speed USB port compatible with USB 2.0 specification
(for connection of non-encrypted USB drive for printing)
Rear: High-Speed USB port compatible with USB 2.0 specification
Type B (USB port for computer)
Ethernet Standards IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T)
IEEE802.3az (Energy Efficient Ethernet); connected device should
comply with IEEE802.3az standards
Note: Use a category 5e or higher shielded twisted pair cable for all
interfaces.
Parent topic: Technical Specifications
Electrical Specifications
Rated voltage AC 100 to 240 V
Rated frequency range 50/60 Hz
Rated current 3.4 to 1.6 A
To Next Page
Loading...
