47
Application area size Temperature Time Pressure
Letter/A4 and smaller 338 °F (170 °C) 45 seconds 6.1 Psi (4.2 N/cm
2
)
Larger than letter/A4 45–90 seconds
Fixing conditions for polyester pre-treatment solution
Application area size Temperature Time Pressure
Letter/A4 and smaller 266 °F (130 °C) 60 seconds 4.4 Psi (3.0 N/cm
2
)
Larger than letter/A4 60 seconds
Note: Optimum conditions may vary depending on the type of heat press used; make sure to test in
advance to determine the correct conditions for your heat press. If traces of the pre-treatment solution
are visible, try washing the T-shirt in water. However, the effects depend on the T-shirt material.
Parent topic: Pre-treating a T-shirt
Creating Your T-shirt Design
After creating the data, use the Garment Creator 2 software to transmit it to the printer.
U.S. and Canada: Visit your product's support website at epson.com/support (U.S.) or epson.ca/support
(Canada) and select your product to download the Garment Creator 2 software and utilities.
Latin America: Visit your product's support website at latin.epson.com/support and select your product to
download the Garment Creator 2 software and utilities.
Follow the guidelines in these sections when creating your T-shirt design.
Data Creation and Transmission Guidelines
Printable Area for Each Platen
Parent topic: Basic Printing
Data Creation and Transmission Guidelines
When creating data and transmitting it to the printer using Garment Creator 2, follow these guidelines:
• For best results, select sRGB colors when creating data to be printed on a T-shirt. sRGB colors are
closer to the actual print results.
• You can print in these formats from Garment Creator: TIFF, JPEG, PNG, BMP.
To Next Page
Loading...
