73
Note: If the T-shirt is coated with pre-treatment liquid or the grip pad tool catches on the fabric, you
can use a heat-resistant release sheet with the grip pad tool as shown.
8. Tuck the T-shirt around the platen so that it does not drape over the movable base.
Parent topic: Loading a T-shirt
Related tasks
Attaching the Grip Pad to the Platen
Loading a T-shirt on the Platen
Before printing, carefully load a T-shirt on the platen using a platen frame.
Note: Make sure that the correct platen is installed on the printer.
1. Turn on the printer, if necessary.
To Next Page
Loading...
