117
Caution: Do not shake or swing the ink pack or the ink tray containing the ink pack with too much
force or the ink may leak.
5. Insert the ink tray back into its slot in the printer.
6. Repeat these steps for any other ink packs that need shaking.
Parent topic: Shaking and Replacing Ink Packs
Related references
Handling Ink and Cleaning Packs
Handling White Ink
Ink Pack Safety Instructions
Replacing the Ink Packs
Make sure you have your replacement ink packs handy before you begin. You must install new ink packs
immediately after removing the old ones.
Note: Replace all expended ink packs. You cannot print if any of the ink packs are expended or any ink
trays are empty. You can replace an expended ink pack during printing, however, colors may look
different depending on how the ink dries. To avoid this, replace the ink pack before printing. You can still
use the removed ink pack for future prints until it is expended.
Note: This printer is designed for use with Epson ink packs only, not third-party ink packs or ink. Other
brands of ink supplies are not compatible and, if described as compatible, may not function properly or
continuously.
The included initial ink packs are designed for reliable printer setup and cannot be used as replacement
ink packs or resold. After setup, the remaining ink is available for printing. Yields are based on ISO
24711 in default mode, printing continuously. Yields vary due to print images, settings, and
temperatures. Printing infrequently or primarily with one color reduces yields. All ink packs must be
installed with ink for printing and printer maintenance. For print quality, some ink remains in replaced ink
packs.
To Next Page
Loading...
