118
Caution: Leave your old ink packs in the ink unit until you are ready to replace them to prevent the print
head nozzles from drying out. Do not open ink packs until you are ready to install the ink. If you see a
message to replace the White ink packs, replace the ink pack immediately or the printer may be
damaged.
Note: If a message is displayed telling you that it is time to replace an ink supply unit, you can view the
replacement steps on the LCD screen. Select the message on the screen, select it again from the
Message List screen, and then select How To... on the Information screen.
1. Make sure the product is turned on.
2. Open the ink cover for the ink packs you are replacing.
Note: You can also select How To... on the LCD screen to see the replacement steps.
To Next Page
Loading...
