114
If image quality has not improved after making adjustments, do one of the following:
• If you selected Standard to make adjustments, try using Micro Adjust.
• If you selected Micro Adjust to make adjustments, try setting the Platen Gap setting to Manual.
Otherwise, you can try printing the with Uni-Directional (Low Speed) setting enabled in Garment
Creator 2. You can also repeat printing or print a job from a USB memory stick and select Uni-
Directional as the Head Move Direction setting from the printer's preview screen.
Parent topic: Print Head Alignment
Related tasks
Changing the Platen Height
Registering and Using Media Settings
Related topics
Loading a T-shirt
Shaking and Replacing Ink Packs
See these sections to shake and replace the ink packs.
Shaking the Ink Packs
Replacing the Ink Packs
Parent topic: Maintenance
Shaking the Ink Packs
To maintain print quality, periodically shake the ink supply units after installing them, and especially
when you see a message on the printer's LCD screen telling you to shake the ink. Shake the White ink
supply units once a day, and shake the color ink supply units once a month.
Caution: Be careful handling the ink packs as there may be ink around the ink supply port.
Warning: If ink gets on your skin, wash it thoroughly with plenty of soap and water. If ink gets into your
eyes, flush them immediately with water. If ink gets into your mouth, spit it out and see a doctor right
away. Keep ink packs out of the reach of children.
Note: If a message is displayed telling you that it is time to shake the ink, you can view the procedure on
the LCD screen. Select the message on the screen, select it again from the Message List screen, and
then select How To... on the Information screen.
To Next Page
Loading...
