123
• Do not use ink cleaning solution that has already been used to clean something else. Using dirty ink
cleaning solution causes stains.
• Used ink cleaning solution is classified as industrial waste. Dispose of it in the same way as waste ink.
• Wash your hands thoroughly after using the cleaning solution.
1. Remove the lid and the airtight seal from the ink cleaning solution bottle.
2. Place the cup supplied with the maintenance kit on a tray and pour a small amount of ink cleaning
solution into the cup.
Note: If you are cleaning the sensor cover and encoder strip (carriage scale), pour about 0.15 ounce
(5 ml) into the cup (about halfway to the bottom line).
3. Place a cleaning swab or cleaning wipe in the ink cleaning solution and let it soak in. Make sure that
the solution does not drip from the cleaning swab or cleaning wipe when you remove it from the cup.
To Next Page
Loading...
