Epson SureColor F2270 - Page 159

159
Print Adjustments options
Setting Options Description
Print Head Alignment Standard
Micro Adjust
Select to run the head alignment utility
to correct grainy or blurry print results
by realigning the print head for each
platen size
Note: This does not affect your print
results if you set uni-directional printing
for the print job.
Media Feed Adjustment -1.00% to 1.00% Adjust how far (width) the platen feeds
between each movement of the print
head
Media Management options
Setting Option Description
01 XXXXXX to 30 XXXXXX Change Name
Platen Gap
Change details for registered media
settings
• Select Change Name to edit the
name of a registered media setting
entry
• Select Platen Gap to adjust the
distance between the media and the
print head. Select Auto to have the
printer automatically detect the
surface of the media, or select
Manual to manually set the platen
gap.
Parent topic: Using the Control Panel Menus
Related tasks
Registering and Using Media Settings
Aligning the Print Head