81
7. Gently pull the edges of the sleeve outside of the frame to remove any slack.
Note: The printer detects the highest part of the garment surface and adjusts the height accordingly.
If there are any wrinkles, creases or slack near the inside edge of the frame, a platen height error
may occur or print quality may decline. Stretch the T-shirt to remove the slack, however, do not
stretch the T-shirt so much that the printed image is distorted or that the white under-base print
extends outside of the image.
8. Press down the frame of the platen so that it does not become loose.
9. Tuck the sleeve around and under the frame so that it does not drape over the movable base.
Parent topic: Loading a T-shirt
Related references
Optional Equipment and Replacement Parts
To Next Page
Loading...
