87
10. Gently pull the edges of the shirt outside of the frame to remove any slack.
Note: The printer detects the highest part of the garment surface. If there are any wrinkles, creases
or slack near the inside edge of the frame, a platen height error may occur or print quality may
decline. Stretch the shirt to remove the slack, however, do not stretch it so much that the printed
image will be distorted or that the white under-base print will extend outside of the image.
11. Press down the frame of the platen so that it does not become loose.
12. Tuck the shirt around the platen so that it does not drape over the movable base.
Parent topic: Loading a T-shirt
Related references
Optional Equipment and Replacement Parts
To Next Page
Loading...
