Epson TM-T88VI Technical Reference Guide

17
Chapter 1 Product Overview
1
Control Panel
Power LED
 Lights when the power supply is on.
 Off when the power supply is off.
 Flashes during the network to start up, when waiting for power off, or updating firmware.
Error LED
 Lights or flashes when an error occurs. (For information about the flashing patterns, see "Status and Errors"
on page 19
.)
 Lights after the power is turned on or after a reset (offline). Automatically goes out after a while to indicate
that the printer is ready.
 Off when the printer is in standard mode (online).
Paper LED
 Lights when the roll paper is out.
 Flashes to urge user to operate the Feed button.
Connectors
All connectors are located on the lower rear of the printer.
Do not turn on by using the power switch while waiting for the power to turn off (when the Power
LED is flashing). Otherwise, it may not startup correctly.
 The installed interface varies depending on the model.
 Do not insert a Type-B USB connector into the LAN connector or the drawer kick connector. If it
is inserted, the connector, printer, and the system may malfunction.
2
1
3
4
5
6
7

Epson TM-T88VI Specifications

General

Type	POS printer
Print technology	Thermal
Maximum resolution	180 x 180 DPI
Cutter	Yes
Safety	UL60950-1/CSA C22.2 No.60950-1
Built-in barcodes	AZTECCODE, Code 39, Code 93, Code-128 Codabar Library, Data Matrix, GS1 DataBar, GS1 DataBar Limited, GS1-128, MaxiCode, PDF417, UPC-A, UPC-E
Autocutter durability	3 million cuts
Mean time between failures (MTBF)	360000 h
Maximum roll diameter	83 mm
Supported paper width	57.50/79.5 mm
Bluetooth version	2.1+EDR
Standard interfaces	Bluetooth, Ethernet, Parallel, Serial, USB
Connectivity technology	Wired & Wireless
Electromagnetic compatibility	FCC/ICES-003 Class A
Mean cycles between failures (MCBF)	70000000
Product color	Black

Weight and Dimensions

Depth	195 mm
Width	145 mm
Height	148 mm