Epson TM-T88VI - Setup; Flow of Setup

29
Chapter 2 Setup
2
Setup
This chapter describes setup and installation of the product and peripherals.
Flow of Setup
This chapter consists of the following sections along with the setup flow of the product and peripherals.
2. Adjusting the Paper Roll Near-End Sensor (page 31)
5. Connecting the Cash Drawer (page 43)
4. Connecting the Printer to the Host (page 33)
6. Setting the Built-in Buzzer (for Model with a Built-in Buzzer) (page 45)
1. Installing the Printer (page 30)
7. Connecting the Optional External Buzzer (page 46)
8. Attaching the Connector Cover (page 48)
9. Arranging the Cables (page 50)
10. Attaching the Power Switch Cover (page 52)
3. Connecting the AC adapter (page 32)
11. Changing the Paper Width (page 53)
12. RTC Settings (page 54)