42
Serial Interface
When connecting to the host computer through a serial interface (RS-232), connect a serial cable to the printer,
start the host computer, and then turn on the printer.
Parallel Interface
When connecting to the host computer using a parallel interface, connect the parallel cable to the printer, start
the host computer, and then turn on the printer.
When using connectors equipped with screws, tighten the screws on both sides to secure the
connectors firmly.
When using interface cables equipped with a ground line, attach the ground line to the screw hole
marked "FG" on the printer.
When using interface cables equipped with a ground line, attach the ground line to the screw hole
marked "FG" on the printer.
To Next Page
Loading...
