Epson TM-T88VI - Paper Width; Interface Selection

66
Column emulation mode
 Standard mode (default setting)
 48/36 column mode
Print density during multi-tone printing
Selectable from 70% to 130% (5% increment)
Default setting: 100%
Power supply output
Selectable from levels 1 to 3 low power load
Default setting: level 3
Paper width
 80mm (default setting)
 58mm
Interface selection
 Fixed to UIB
 Fixed to built-in USB
 Fixed to Ethernet (Wi-Fi)
 UIB/Bluetooth
 Built-in USB auto switch
 The entire interface is enabled (default setting)
Interface switch wait time
Select from 1 to 10 seconds (in intervals of 1 second)
1 second (default setting)
Depending on print conditions, such as print duty, print head temperature, and data transmission
speed, print speed is automatically adjusted, which may cause white lines due to intermittent print
(the motor sometimes stops). To avoid this, keep the print speed constant by setting it lower.