19
Chapter 1 Product Overview
1
Status and Errors
Error Status
There are three possible error types: automatically recoverable errors, recoverable errors, and unrecoverable
errors.
Automatically Recoverable Errors
Printing is no longer possible when automatically recoverable errors occur. They can be recovered easily, as
described below.
Recoverable Errors
Printing is no longer possible when recoverable errors occur. They can be recovered easily by turning the power
on again or sending an error recovery command from the driver after eliminating the cause of the error.
Error Error description Error LED flash code Recovery measure
Roll paper
cover open
error
The roll paper cover was
opened during printing.
Recovers automatically
when the roll paper cover is
closed.
Print head
temperature
error
A high temperature
outside the head drive
operating range was
detected.
Recovers automatically
when the print head cools.
TM-Intelligent
function error
Cannot connect to the
server.
Recovers automatically
when the printer settings
are corrected.
Error Error description Error LED flash code Recovery measure
Autocutter
error
Autocutter does not work
correctly.
Remove the jammed paper
or foreign matter in the
printer, close the roll paper
cover, send the error
recovery command, or turn
the power on to recover.
The error recovery command is valid only if a recoverable error (excluding automatically recoverable
errors) occurs.
LED ON
LED OFF
Approx. 320 ms
LED ON
LED OFF
Approx. 320 ms
Power LED ON
LED OFF
Approx. 160 ms
Approx. 5120 ms
Error LED OFF
LED ON
LED OFF
Approx. 320 ms
Approx. 5120 ms
To Next Page
Loading...
Need help?
General
Weight and Dimensions
