Epson TM-T88VI - Baud Rate

67
Chapter 3 Advanced Usage
3
Main interface selection
 Auto (interface that receives data first) (default setting)
 UIB
 USB
 UIB/Bluetooth
 Ethernet/Wi-Fi
 No main connection I/F
Startup display
 Enabled
 Disabled (default setting)
Auto re-connect iOS
 Enabled (default settings)
 Disabled
Baud rate
 2400 bps
 4800 bps
 9600 bps
 19200 bps
 38400 bps (default setting)
 57600 bps
 115200 bps
USB class
 Printer class (default setting)
 Vendor-defined class
 When using this printer with multiple interfaces, make sure the interface that is always
connected to be set as the main connection.
 When using multiple interfaces, set the receive buffer capacity to 4 KB.
 You cannot use wired LAN and wireless LAN at the same time.
 The displayed items vary depending on the interface configuration.
 For information about the function, see
"Printing Using Multiple Interfaces" on page 28.