1-4 General Information Rev. A
1.4 Product Specifications Overview
Print method serial impact dot matrix
Paper width 76 mm / 69.5 mm / 57.5 mm {3.00"/2.74"/2.26"}
Cut type There are 2 types. The type can be changed.
Partial cut (cutting with one point on left edge left uncut)
Character sets 95 alphanumeric, 48 international characters,
Extended graphics: 128 12 pages. (15 tables for Japanese model)
Multilingual character model supports printing with one of the following character sets:
Japanese Kanji (Two-pass printing font) (JIS X0208-1990): 6879
Simplified Chinese (Two-pass printing font) (GB18030-2022 (Lv.2)): 28806
Traditional Chinese (Two-pass printing font) (Big 5): 13494
Korean (Two-pass printing font) (KS C5601 type): 8366
Thai (Three-pass printing font) : 128 characters 7 pages (133 character types)
Interface
(compatible)
RS-232C / Bidirectional parallel
Ethernet / USB
Buffer Receive buffer:
20 KB* or 40 bytes (Selectable by using DIP switch 1-2)
*May be 4 KB depending on the model.
Non-volatile graphics data buffer:
128 KB
User NV memory: 8 KB
Power supply Power supplied by AC adapter
Be sure to always use a specified AC adapter: AC adapter,C1 (model no.: M235B),
PS-180 (model no.: M159E), or PS-190 (model no.: M368A)
Operating voltage 24 VDC7%
Consumption
current (at 24 V)
1.3 A
Power
consumption*
(except for
drawer kick
driving)
Operating:Mean: Alphanumeric model: Approximately 31 W
Multilingual* model: Approximately 38 W
Standby: Mean: Approximately 2.2 W
*Average power obtained under our operating conditions. Differs depending on use
conditions and model.
Temperature During operation: 0 to 50C {41 to 122F}. (At 34C {93F} or higher, there are humidity
restrictions; refer to “Environmental Conditions” (page 1-12)
Humidity During operation:10 to 90% (no condensation)
During storage:10 to 90% (no condensation; excludes paper and ribbon)
Weight (mass) Type A: Approximately 2.7 kg {5.94 lb}
Type B: Approximately 2.5 kg {5.5 lb}
Type D: Approximately 2.3 kg {5.06 lb}