6-8 Notices for Replacement of the TM-U210/TM-U220/TM-U300 Rev. A
6.1.8.4 Memory Switches and Memory Switch Setup Mode
The TM-U220II has memory switches in the form of a software DIP switch. The memory switch
setup mode is for setting the memory switches by using only the printer (no host PC required).
See “Memory Switches” (page 3-20) and “Memory Switch Setup Mode” (page 3-23) for details.
6.1.9 Driver compatibility
This section describes compatibility and important points for replacement.
6.1.9.1 Advanced Printer Driver
The TM-U220II has APD compatibility with the TM-U210/TM-U220. Therefore, the TM-U220II
can be operated using the TM-U210/TM-U220 Advanced Printer Driver.
However, the print margin is slightly different from the TM-U210 and the TM-U210 driver
cannot use the NV memory function. See “Printing format compatibility” (page 6-1) and “New
functions added (if replacing the TM-U210)” (page 6-7) for the differences.
6.1.9.2 OPOS
The TM-U220II has OPOS compatibility with the TM-U210/TM-U220. Therefore, the TM-U220II
can be operated using the TM-U210/TM-U220 OPOS. However, the print margin is slightly
different from the TM-U210 and the TM-U210 driver cannot use the NV memory function. See
“Printing format compatibility” (page 6-1) and “New functions added (if replacing the TM-U210)”
(page 6-7) for the differences.
6.1.9.3 ESC/POS command (Direct control)
The TM-U220II has ESC/POS command compatibility with the TM-U210/TM-U220. Therefore,
the TM-U220II can be operated using the program source of the TM-U210/TM-U220. However,
the print margin is slightly different from the TM-U210 and the TM-U210 driver cannot use the
NV memory function. See “Printing format compatibility” (page 6-1) for the differences.
To Next Page
Loading...
Need help?
General