Epson TM-U220II Technical Reference Guide

Rev. A Notices for Replacement of the TM-U210/TM-U220/TM-U300 6-11
TM-U220II Technical Reference Guide
6.2.1.3 Cutting distance from print start position
The TM-U220II has nearly the same distance between the auto cut position and print start
position as the TM-U300. Therefore, the top margin remains the same when the TM-U300 is
replaced with the TM-U220II with autocutter. In other cases, please refer to the table and figures
below.
Cutting position TM-U300 (Type A, B, C, and D) TM-U220II (Type A, B, C, and D)
Autocutting position to print start
position
36 mm 27 mm
Manual cut position to print start
position
26 mm (Type A and B)
28 mm (Type C and D)
Type D: 22.1 mm
Type A and B: 34.9 mm
TM-U220II (Type A and B)
TM-U300 (TypeA, B, C, and D)
These values are reference values.
(When using 76-mm roll paper)
TM-U220II (Type D)
(When using
76-mm roll paper)
Print start position line
Auto cut position line
Manual cut position line
27 mm
34.9 mm
Paper feed direction
Print start position line
Manual cut position line
22.1 mm
Paper feed direction
Printstartpositionline
Autocutpositionline
Manualcutpositionline
26mm(TypeA,B)
36mm
Paperfeeddirection
28mm(TypeC,D)

Epson TM-U220II Specifications

General

Brand	Epson
Model	TM-U220II
Category	Printer
Language	English