Rev. A Troubleshooting 4-5
TM-U220II Technical Reference Guide
❏ Parity error
❏ Framing error
❏ Overrun error
Note:
For other errors, we recommend confirming the transmission setting of DIP switch 1-3: Handshaking.
4.6 Print Speed is Slow When Using Windows Printer Driver
When the printer prints a Windows font using the EPSON Advanced Printer Driver, the print
speed is slow. To improve the print speed, use a printer font.
4.7 Printer doesn’t cut roll paper with the autocutter
TM-U220II Type D does not have an autocutter unit. If you use the type D model, you can’t use
the autocutter function. Use the manual cutter.
4.8 Hexadecimal Dump mode
This feature allows experienced users to see exactly what data is coming to the printer. This can
be useful in finding software problems. When you turn on the hex dump function, the printer
prints all commands and other data in hexadecimal format, along with a guide section to help
you find specific commands.
To use the hex dump feature, follow these steps:
1. After you make sure the printer is off, open the paper roll cover.
2. While you hold down the FEED button, turn on the printer.
3. Close the cover.
To Next Page
Loading...
Need help?
General