3-32 Setup Rev. A
3.4.7.3 USB Interface
If using a USB interface, hook the USB cable through the locking wire saddle to prevent the cable
from coming unplugged.
CAUTION:
When connecting the USB cable, make sure that no load is placed on the cable.
A load on the cable may result in cable or connector damage.
Use a USB cable conforming to the USB 2.0 standard.
3.4.7.4 Wired LAN Interface
Use a LAN cable to connect this printer to a network via a hub.
CAUTION:
Connect using equipment with surge protection if installing the LAN cable outdoors.
The equipment may be damaged by lightning.
Absolutely do not use a drawer kick cable or standard telephone line cable to connect
to the LAN connector.
To Next Page
Loading...
