Rev. A Notices for Replacement of the TM-U210/TM-U220/TM-U300 6-9
TM-U220II Technical Reference Guide
6.2 For TM-U300 Replacement
6.2.1 Printing format compatibility
Printing results of the TM-U220II are nearly the same as the TM-U300. This section describes the
printing area, character, and top margin (cutting position) compatibilities.
6.2.1.1 Printing area
The TM-U220II has almost the same printing area as the TM-U300 as shown in the following
table and figures.Therefore, the TM-U220II can print the same contents as the TM-U300 without
any special adjustment of settings.
These values are reference values.
Printing area and margins
Printing area item TM-U300 (Type A, B, C, and D)
TM-U220II (Type A, B, C, and D)
(when using 76-mm width paper)
Print width 63.5 mm
(200 dots, 400 position)
63.34 mm
(200 dots, 400 position)
Left margin 6 mm 6.8 mm
Right margin 6.5 mm 5.8 mm
76 mm
63.5 mm
6.5 mm
6 mm
Printable area
76 mm
63.34 mm
6.8 mm
5.8 mm
Printable area
TM-U220II (When using 76-mm roll paper)
TM-U300
These values are reference values.