Epson TM-U220II Technical Reference Guide

Rev. A General Information 1-13
TM-U220II Technical Reference Guide
1.6.3 Installation
Install the printer horizontally as a basic position.The printer also must be installed so that it
does not move or vibrate during paper cutting or the drawer kick operation. Velcro tape is
available as an option.
The printer (Type B or D) can be also installed on a wall with the optional wall hanging bracket
(WH-10).
Impact resistance: When packed:
Package: Epson standard package
Height: 60 cm (2 feet)
Directions: 1 corner, 3 edges, and 6 surfaces
No external or internal damage should be found after the
drop test, and the unit should operate normally.
When unpacked:
Height: 5 cm (2")
Directions: Lift one edge and release it (for all 4 edges).
When the printer is not printing, no external or internal
damage should be found after the drop test.

Epson TM-U220II Specifications

General

Brand	Epson
Model	TM-U220II
Category	Printer
Language	English