6-14 Notices for Replacement of the TM-U210/TM-U220/TM-U300 Rev. A
6.2.6.1 Newly added statuses
The following statuses have been added to the TM-U220II.
❏ Roll paper cover open/close status
❏ Roll paper near-end status (When equipped with a near-end detector [Factory option])
6.2.7 Use for journal
The TM-U220II Type A can be used for journals in the same manner as the TM-U300 (Type A
and C). However, you need to be aware of the following points when replacing the TM-300 with
the TM-U220II.
❏ The TM-U300 can print two copies using carbon paper but the TM-U220II can only print one
copy using carbon paper.
6.2.8 Added new functions
6.2.8.1 Wall hanging
The TM-U220II Type B and D can be installed on a wall using the optional wall-hanging
hardware WH-10.
6.2.8.2 NV bit-image
The TM-U220II can print bit-images on roll paper.
6.2.8.3 User NV memory
The TM-U220II can store text data.
6.2.8.4 Memory Switches and Memory Switch Setup Mode
The TM-U220II has memory switches in the form of a software DIP switch. The memory switch
setup mode is for setting the memory switches by using only the printer (no host PC required).
See “Memory Switches” (page 3-20) and “Memory Switch Setup Mode” (page 3-23) for details.
6.2.9 Driver compatibility
This section describes compatibility and important points for replacement.
6.2.9.1 Advanced Printer Driver
The TM-U220II does not have Advanced Printer Driver (APD) compatibility with the TM-U300.
Therefore, the TM-U220II cannot be operated using the TM-U300 APD. However, you can
obtain nearly the same print results as the TM-U300 by using the TM-U220II APD. The print
margin is slightly different. See “Printing format compatibility” (page 6-1) for the differences.
To Next Page
Loading...
Need help?
General