Epson TM-U220II Technical Reference Guide

3-6 Setup Rev. A
3.3 Printer setup
3.3.1 Installing or Replacing the Ribbon Cassette
EPSON recommends the use of genuine EPSON ribbon cassettes. Ribbon cassettes not
manufactured by EPSON may cause damage to your printer that is not covered by EPSON’s
warranties.
To install the ribbon cassette for the first time or to replace a used ribbon, follow the steps below:
1. Unpack the ribbon cassette and turn
the knob in the direction shown to
take up any slack.
2. Open the ribbon cassette cover of the
printer, using the tabs on each side of
the cover.
3. Remove the old ribbon, if there is
one.
4. Insert the new ribbon cassette as
shown and push the ribbon cassette
down until it clicks.
Note:
Make sure the ribbon is installed between the
print head and the platen without wrinkles or
creases.
5. Close the ribbon cassette cover of the printer.
Knob

Epson TM-U220II Specifications

General

Brand	Epson
Model	TM-U220II
Category	Printer
Language	English