Rev. A Setup 3-25
TM-U220II Technical Reference Guide
Selecting individual settings
❏ Basic serial interface setting
To select transmission conditions, first choose “Serial interface settings”.
❏ Baud Rate Setup
Press the FEED button the number of times required to select the desired “Baud Rate Setup” used
for transmission conditions.
bps: Indicates the number of transmitted bits per second (bps).
❏ Data length, handshake, or parity
Press the FEED button the number of times required to select the desired “Data length,
handshake, or parity” setting used for transmission conditions.
Press FEED button Setting selected
0 times: No change
1 time: 115200 bps
2 times: 57600 bps
3 times: 38400 bps
4 times: 19200 bps
5 times: 9600 bps
6 times: 4800 bps
7 times: 2400 bps
8 times: 1200 bps
9 or more times: No change
Press FEED button Setting selected
Data Length Handshake Parity
0 times: No change
1 time: 8 bits DTR/DSR control No parity
2 times: Even
3 times: Odd
4 times: XON/XOFF control No parity
5 times: Even
6 times: Odd
7 times: 7 bits DTR/DSR control No parity
8 times: Even
9 times: Odd
10 times: XON/XOFF control No parity
11 times: Even
12 times: Odd
13 or more times: No change
To Next Page
Loading...
