Epson TM-U295

SHEET
I
NO.
SHEET
REVISION
F
TITLE
NEXT
II
TM-U295/U295P
Specification
(STANDARD)
General Description
Application
These specifications apply to TM-U295(Standard Specification)(RS-232 Serial Interface
Specification) or to TM-U295P (IEEE 1284 Bidirectional Parallel Interface Specification).
Features
The TM-U295 is terminal slip printer which uses a 7-pin shuttle dot printing method, and
provides the different modes, standard and page (
*
).
The printer has the following features:
ù
Programmable page length.
ù
Programmable print starting position.
ù
Multiple character sizes (standard, double-width, double-height, and quadruple).
ù
Character directions: 4
ù
International character set selection.
ù
Forward and backward paper feeding.
ù
Command protocol based on the ESC/POS
TM
standard.
ù
Programmable paper feed amount.
ù
Paper eject function.
ù
Top Of Form (TOF) and Bottom Of Form (BOF) sensors.
ù
Data reception during printing (improved throughput and less waiting time for the host
computer).
ù
512 byte printer buffer memory.
ù
Compact, space efficient design.
ù
Drawer kick-out function.
ù
Automatic Status Back (ASB) function to automatically send printer status changes.
ù
Either RS-232 serial interface or 1284 bidirectional parallel interface should be selectable
when the product is shipped from the factory.
*
In page mode, the print data is buffered within a specified printing area in the memory.
After all the data has been buffered in the specified printing area, it is all printed at one
time.