Epson TM-U295

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
58 57
ESC e
n
[Name] Print and reverse feed n lines
[Format] ASCII ESC e
n
Hex 1B 65
n
Decimal 27 101
n
[Range] 0
£
n
£
255
[Description] Prints the data in the print buffer and feeds
n
lines in the reverse direction.
[Notes]
ù
This command is available only in standard mode.
ù
This command sets the print position to the beginning of the line.
ù
The setting values do not remain.
ESC f
t1 t2
[Name] Set cut sheet wait time
[Format] ASCII ESC f
t1 t2
Hex 1B 66
t1 t2
Decimal 27 102
t1 t2
[Range]
t1
= 0
0
£
t2
£
64
[Description] Sets the time during which the printer waits for a cut sheet to be inserted and the time
from insertion of the sheet to the start of printing.
ù
The time during which the printer waits for a cut sheet to be inserted is unlimited.
ù
The printer starts operation [
t2
´
0.1] seconds after insertion of the sheet is detected.
[Notes]
ù
When either
t1
or
t2
is out of the specified range, this command does not change the
previously set wait time.
[Default]
t1
= 0,
t2
= 10