EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
15 14
3. FUNCTIONS
3.1 Commands
3.1.1 Command description
The command system of the TM-U295/U295P is based on ESC/POS and has both Standard Mode
and Page Mode.
1) Standard Mode
The standard command system uses the printer as a common serial terminal printer. Printing and
control functions are executed immediately after the commands are received.
2) Page Mode
The print command is stored in the specified printable area in memory. After all the data has been
stored, the printer prints it at one time.
To Next Page
Loading...
