EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
57 56
ESC c 4
n
[Name] Select paper sensor(s) to stop printing
[Format] ASCII ESC c 4
n
Hex 1B 63 34
n
Decimal 27 99 52
n
[Range] 0
£
n
£
255
[Description] Selects the paper sensor(s) used to stop printing when a paper-end is detected, using
n
as follows:
Bit Off/On Hex Decimal Function
Off -- -- Undefined.0
On -- -- Undefined.
Off -- -- Undefined.1
On -- -- Undefined.
Off -- -- Undefined.2
On -- -- Undefined.
Off -- -- Undefined.3
On -- -- Undefined.
Off 00 0 TOF sensor disabled.4
On 10 16 TOF sensor enabled.
Off 00 0 BOF sensor disabled.5
On 20 32 BOF sensor enabled.
Off -- -- Undefined.6
On -- -- Undefined.
Off -- -- Undefined.7
On -- -- Undefined.
[Notes]
ù
It is possible to select multiple sensors to stop printing. Then, if any of the selected
sensors detects a paper-end, the printer stops printing.
ù
When a paper-end is detected, printing stops after printing and feeding the current line.
In this time, if the panel buttons are disabled, the printer release the paper and waits the
next paper automatically.
[Default]
n
= 0
[Reference]
ESC c 5
5556