Epson TM-U295

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
21
1. GENERAL SPECIFICATIONS
1.1 Printing Specifications
1) Printing method: Impact dot matrix
2) Head wire configuration: 7-pin shuttle type
3) Printing direction: Unidirectional
4) Lines per second: Refer to Table 1.1.1.
5) Characters per line: Refer to Table 1.1.1.
6) Characters per inch: Refer to Table 1.1.1.
7) Paper feed speed: Approximately 12.5 line (52.9 mm (2.08"))/second
(When the ESC d and FF commands are used.)
Table 1.1.1 Lines Per Inch, Characters Per Second, Character Per Line, Character Size
Character Structure
(Horizontal
´ Vertical)
Character
Set
Characters
Per Inch (mm)
Lines Per Second (LPS)
(Approximately)
Characters Per
Line (column)
Character Size
(mm) (W ´ H)
ANK 0.31
1.6 ´ 2.9
(.063 ´ .114)
5 ´ 7
Graphics 0
1.9 to 2.3 35
1.9 ´ 2.9
(.075 ´ .114)
ANK 0.31
1.3 ´ 2.9
(.051 ´ .114)
7 ´ 7
Graphics 0
1.9 to 2.3
42
1.6 ´ 2.9
(.063 ´ .114)
(All the numeric values are typical.)
1.2 Character Specifications
1) Character set: Alphanumeric: 95
International: 32
Extended graphics: 128 ´ 3
2) Character structure: 5 ´ 7 with 1-dot spacing (normal dot)
7 ´ 7 with 3-dot spacing (half dot)
3) Character size: Refer to Table 1.1.1.