EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
30 29
Á
If the print data exceeds the printing area (including the space to the right of a character) before a
command that is followed by line feeding (
LF
,
ESC J
, etc.) is received, line feeding is executed
automatically within the printing area. The development position therefore moves to the beginning
of the next line. The line feed amount depends on the values set by command (
ESC 2
,
ESC 3
, etc.).
If the print data for the next line contains double-height or quadruple-size characters, the amount of
line feeding may be insufficient, resulting in overlapping of the characters' higher-order dots with the
previous line. To avoid this, increase the amount of line feeding.
To Next Page
Loading...
