Epson TM-U295

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
36 35
FF
[Name]
À
Print and eject cut sheet (in standard mode)
Á
Print and return to standard mode (in page mode)
[Format] ASCII FF
Hex 0C
Decimal 12
This command functions differently depending on the printer mode selected.
À
When standard mode is selected:
[Description] Prints the data in the print buffer and ejects the sheet.
[Notes]
ù
When the eject length has been set by
ESC C
, the printer ejects the sheet based on the
current eject length. Otherwise, the printer ejects the sheet completely. If a paper
out is detected during ejection, the printer stops ejecting the sheet even if the specified
amount of paper has not been ejected.
ù
The ejecting direction is specified by
ESC F
.
[Reference]
ESC F
,
ESC C
Á
When page mode is selected:
[Description] Prints the data in all the print areas and returns to standard mode. All the data is deleted
after printing. The paper is not ejected.
[Notes]
ù
This command sets the print position to the beginning of the line.
[Reference]
ESC L
CR
[Name] Print and carriage return
[Format] ASCII CR
Hex 0D
Decimal 13
[Description] This command has the same function as
LF
if automatic line feed is enabled, and is
ignored if automatic line feed is disabled.
[Notes]
ù
This command sets the print position to the beginning of the line.
ù
This command is ignored with a serial interface model.