Epson TM-U295 - Page 74

EPSON
TITLE
SHEET
REVISION
NO.
SHEETNEXT
F
TM-U295/U295P
Specification
(STANDARD)
52 51
ù
The following commands have two type of setting values, one is for standard mode, the
other is for page mode.
ESC SP
: Set right-side character spacing
ESC 2
: Set the inital line spacing
ESC 3
: Set line spacing
ù
The following commands are ignored in page mode.
ESC K
: Print and reverse feed
ESC e
: Print and reverse feed
n
lines
ESC *
**
*:
Set double-density bit image.
ESC q
: Paper release
The following commands are settable but do not have any effect in page mode.
ù ESC {
(Upside-down printing mode on/off)
ù ESC !
(7
´
7 font mode on/off and underline mode on/off)
ù
The commands are effective only in standard mode.
ù
Use of
ESC @
causes the printer to return to standard mode without carrying out
printing.
[Default] Standard mode is selected.
[Reference]
FF
Section 3.9.2,
Page Mode Limitations
Appendix D,
Transmission Status Identification